This article explains how to navigate profiles and functions in swipe mode.
This section assumes that you are in swipe mode. See here for instructions on switching between the navigation modes swipe and tap-only.
Viewing and selecting function cards in current profile
- Swipe the screen or tap (short press) on the navigation button. The screen changes from displaying the active function card to displaying the function card preview — figure 1 (left).
Figure 1 — Active function card view (left) and function card preview (right)
2. Swipe left or right to view other function cards within the current profile — see figure 1 (right).
3. Select a function card by either tapping on the required function card when it comes into view or, when the required card is in the middle of the display, wait a few seconds and the card is selected automatically.
Viewing and selecting function cards in another profile
- To view and select function cards in another profile, swipe up or down in the function card preview screen. The screen view will focus on the first function in the profile or the last-used function in the profile depending on how it is set up.
- Swipe left or right to choose the required function in the selected profile.
Figure 2 — swipe up or down in the function card preview screen to view another profile
